Broken hood lock? - no problem

[Andytech3]

When I bought the car, one of the hood locks was broken.

HL_broken

So I created a 3D component based on the undamaged one on the driver's side to print on a 3D printer. The material I used is PET-G. It is stable, the lock has been working for a year without any problems.

3D_model

My model is a copy of the driver's lock, but in Slicer you can just mirror the model and you have a model on the passenger side. If you're interested, send me a private message

good

File:

ZhiDou_D1_HLock.rar

File

(4.87 KiB) Downloaded 31150 times

[Denikachou]

Hi Andytech.

I'm the owner of a Zhidou D1 and I've the same problem with the Hood lock taht are broken when I've bought the car.

I try to use your file.rar but it seems there is a password to uncompressed it.

Is it possible to use your file ? I yes, what is the password or is it possible for you to send me the original file maybe.

Thanks to you.

Denis (from Belgium)

[Andytech3]

I will send the password in a private message