Broken hood lock? - no problem

Andytech3 · Post by **Andytech3** » Thu Jan 01, 2026 8:48 pm

When I bought the car, one of the hood locks was broken.

: HL_broken

So I created a 3D component based on the undamaged one on the driver's side to print on a 3D printer.

: 3D_model

My model is a copy of the driver's lock, but in Slicer you can just mirror the model and you have a model on the passenger side. If you're interested, send me a private message

: good

File:

ZhiDou_D1_HLock.rar: File; (4.87 KiB) Downloaded 158 times